Сообщение от Кусок лога Неры:
1K22-1867-0795-66M4-5242-1930-****
1E14-AA00-1911-0000-8680-2916-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
Recorder: <Optiarc BDRW BD-M100A> Version: 1.0e - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Optiarc BDRW BD-M100A >Version: 1.0e - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160812AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160812AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Optiarc BDRW BD-M100A 1.0e JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
Optiarc BDRW BD-M100A F: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096236kB)
Free physical memory: 1478MB (1514020kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.3.2008
Burn BD Image
0:24:52 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
0:24:52 #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using Blu-ray Disc media
0:24:53 #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 23652351 (5256:04.51, 46195MB)
Last address to be written: 23620927 (5249:05.52, 46134MB)
0:24:53 #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
0:24:53 #5 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: Optiarc BDRW BD-M100A, Media type: BD-R (seq)
0:24:53 #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
0:24:53 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 23620928 (23620928) = #23620928/5249:5.53
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 23620928 blocks [F: Optiarc BDRW BD-M100A]
--------------------------------------------------------------
0:24:53 #8 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: Optiarc BDRW BD-M100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 48375660544, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 23620928 | 23620928 | 0x00
23620928 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
0:24:53 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
0:24:53 #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
0:24:53 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
0:24:53 #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
0:24:53 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
0:24:53 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8 990 KB/s)
0:24:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
0:24:53 #16 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 4
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 34 (22 h):
2 recording layer (DL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 46 46 46 46 3C 3C 3C 3C
00 00 00 00 89 3D 85 1E - 1E 4A 1B 74 A0 F0 F0 F0
F0 F8 F8 F8 F8 F8 F8 F8 - F8 50 00 50 00 50 00 50
00 58 00 58 00 58 00 58 - 00 58 00 58 00 58 00 58
00 A0 A0 C0 C0 C0 00 00
--- Trailer ---
Disc Manufacturer ID: 4D 45 49 00 00 00 h <MEI...>
Media Type ID: 54 30 31 <T01>
Time Stamp [m:y]: 12 : 2005 (7D 5C h)
Product Revision Number: 1
0:24:53 #17 SPTI -1065 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x07f02b00: Len xc
0x00 82 00 08 01 68 E8 00 01 00 08 00
0:24:53 #18 Text 0 File BD.cpp, Line 520
Format BD-R with Format Type 0h, sub-type 1, spare area size 0 -> return code -1065
Allocated spare area size on disc 0
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1065
0:24:53 #19 CDR -1065 File ThreadedTransferInterface.cpp, Line 1680
Invalid command
F: Optiarc BDRW BD-M100A
0:24:53 #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1680
Could not perform start of Disc-at-once
0:24:53 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
0:24:53 #22 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8 990 KB/s)
0:24:53 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
0:24:55 #24 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
0:24:55 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Сообщение от dalex:
А отдельный ключ в неро для записи блюрей вставлен?
Сообщение от :
Nero 8:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
mp3PRO Plug-in:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
DVD-Video Multichannel Plug-in:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
Blu-ray/HD DVD Video Plug-in:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
Lame MP3 Encoder:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
LLS Plugin:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
NERO_TEST:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
BD_TEST:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
HDDVD_TEST:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Not For Resale)
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX (Site License)
Сообщение от :
Что посоветуете?