Здраствуйте, подскажите как решить вопрос.
Программа диагностики SeaTools говрит что нарушена структура файловой системы. Что делать? Вот привожу лог файл. Диск на котором сейчас система стоит был отформатирован перед установкой, винду переставил 2 дня назад и не чего не изменилось. Может это повод для замены по гарантии?
SeaTools Desktop v3.02.04
Copyright (c) 2005 Kroll Ontrack Inc.
10/22/2007 @ 11:09 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 07/16/03
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Diagnostic Results:
Basic Controller Test Result: Passed
System Memory Test Result: Passed
Drive Information:
SIZE MODEL
--------- ---------------------
160 GB ST3160212A
Serial Number = 4LS3NWPV
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 19457x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 2574 21181
EXTENDED
2 NTFS 2575 15335 104969
EXTENDED
3 NTFS 15336 19455 33890
EXTENDED
4 FAT12 19456 19456 8
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50629ML
Copyright (c) 2002-2005 by Seagate Technology LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 22-Oct-2007 22:56:39
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3160212A
Serial Number: 4LS3NWPV
Firmware Revision: 3.AAJ
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 312581808 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
DST Poll Time = 60 seconds
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8200192
Estimated PIO Transfer Rates
Min: 1.20MB/s Max: 2.46MB/s Avg: 2.00MB/s
Estimated DMA Transfer Rates
Min: 73.79MB/s Max: 92.23MB/s Avg: 90.49MB/s
SMART Check: Passed
Short Test Passed: 22-Oct-2007 22:57:50
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (21.1 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (104.9 GB) Large) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 3 (NTFS (33.8 GB) Docs) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 4 (FAT 12 (8 MB) ) Result: Invalid BPB
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
================================================== ======
[Ответ]
Сообщение от Part!zan:
chkdsk drive_letter: /f
Должно помочь. Если не поможет - покажи смарт.
Проверил диск С:\. chkdsk ошибок не выдает.
SeaTools Desktop v3.02.04 опять выдает следуюшее
File Structure Test Result:
Partition 1 (NTFS (21.1 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
================================================== ==
Результаты smart взял из EVEREST Ultimate Edition
--------[ SMART ]---------------------------------------------------
[ ST3160212A (4LS3NWPV) ]
01 Raw Read Error Rate 6 103 97 5254814 OK: Значение нормальное
03 Spin Up Time 0 94 94 0 OK: Всегда пройдено
04 Start/Stop Count 20 99 99 1434 OK: Значение нормальное
05 Reallocated Sector Count 36 100 100 0 OK: Значение нормальное
07 Seek Error Rate 30 70 55 77036558 OK: Значение нормальное
09 Power-On Time Count 0 98 98 1917 OK: Всегда пройдено
0A Spin Retry Count 97 100 99 0 OK: Значение нормальное
0C Power Cycle Count 20 99 99 1584 OK: Значение нормальное
BB <зависит от поставщика> 0 100 100 0 OK: Всегда пройдено
BD <зависит от поставщика> 0 100 100 0 OK: Всегда пройдено
BE <зависит от поставщика> 45 66 58 588644386 OK: Значение нормальное
C2 Temperature 0 34 42 34 OK: Всегда пройдено
C3 Hardware ECC Recovered 0 74 47 113171288 OK: Всегда пройдено
C5 Current Pending Sector Count 0 100 100 0 OK: Всегда пройдено
C6 Off-Line Uncorrectable Sector Count 0 100 100 0 OK: Всегда пройдено
C7 Ultra ATA CRC Error Rate 0 200 200 60 OK: Всегда пройдено
C8 Write Error Rate 0 100 253 0 OK: Всегда пройдено
CA TA Increase Count 0 100 253 0 OK: Всегда пройдено
================================================== ======
Вроде все нормуль. Тогда в чем дело???
[Ответ]
